This Hasegawa cutting board lifter is a non-slip support bar made of polyethylene and elastomer. It is placed under a cutting board to raise it off the countertop, and the non-slip surfaces on both sides keep the board from sliding on the counter and keep the counter from sliding under the board. Raising the board also reduces contact between its underside and the countertop, which helps keep that surface cleaner.
Two lifters are typically used under one cutting board. For a larger board, or if it flexes or bounces, using three lifters is recommended for steadier support.
Available in three lift heights and three lengths, so you can choose the combination that best fits your cutting board. Made in Japan.
Sizes
Height / Length
Dimensions
Weight
1 cm / 30 cm
30 x 3.5 x 1 cm (11.8 x 1.4 x 0.4 in)
60 g (2.1 oz / 0.13 lb)
2 cm / 23 cm
23 x 3.5 x 2 cm (9.1 x 1.4 x 0.8 in)
100 g (3.5 oz / 0.22 lb)
2 cm / 30 cm
30 x 3.5 x 2 cm (11.8 x 1.4 x 0.8 in)
120 g (4.2 oz / 0.26 lb)
2 cm / 39 cm
39 x 3.5 x 2 cm (15.4 x 1.4 x 0.8 in)
160 g (5.6 oz / 0.35 lb)
4.5 cm / 23 cm
23 x 5 x 4.5 cm (9.1 x 2 x 1.8 in)
340 g (12 oz / 0.75 lb)
4.5 cm / 30 cm
30 x 5 x 4.5 cm (11.8 x 2.0 x 1.8 in)
440 g (15.5 oz / 0.97 lb)
4.5 cm / 39 cm
39 x 5 x 4.5 cm (15.4 x 2.0 x 1.8 in)
540 g (19 oz / 1.19 lb)
Variations
Height / Length
Model
1 cm / 30 cm
LF10-300
2 cm / 23 cm
LF20-230
2 cm / 30 cm
LF20-300
2 cm / 39 cm
LF20-390
4.5 cm / 23 cm
LF45-230
4.5 cm / 30 cm
LF45-300
4.5 cm / 39 cm
LF45-390
Specifications
Brand: Hasegawa
Material: Polyethylene and elastomer
Country of Origin: Japan
Shipping
Ships within 7 days. We ship from Japan with tracking.
